Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Paso Robles, CA

Patio Cleaning for Exposed Aggregate in Paso Robles, CA

Moderate-pressure wash for exposed aggregate. Patio cleaning for concrete, pavers and natural stone, with the pressure and cleaner matched to the material. Typical cost $150-$400.

Patio Cleaning for Exposed Aggregate is one of the jobs we do most often in Paso Robles, CA. Typical jobs cost $150-$400, and you approve the price before we begin. For exposed aggregate, that means moderate-pressure wash.

Method and pressure

Moderate-pressure washCleaning method
Usually 1,500-2,500 PSI with a surface cleanerPressure

Cleaning solution: A concrete pre-treatment and degreaser as needed.

What to know about cleaning exposed aggregate

Exposed aggregate concrete has stones showing at the surface. Too much pressure can loosen stones at the edges, and the surface looks best when cleaned and resealed.

Avoid: High pressure at edges and cracks, which can pop out aggregate.

How often: Clean yearly; reseal every 2-3 years.

When to book patio cleaning for exposed aggregate

  • Green or black growth between pavers or on shaded concrete
  • Grease spots near the grill
  • Stains from planters, leaves and furniture
  • Weeds in the joints
  • White chalky haze on pavers or stone

What causes the dirt and stains

  • Shade and damp soil around the patio
  • Cooking grease and food spills
  • Rust from metal furniture and planters
  • Efflorescence (salts) rising out of masonry

Easy upkeep between cleanings

  • Move planters now and then so they don't leave rings
  • Clean grill grease quickly with dish soap and hot water
  • Pull weeds from joints before they spread
  • Sweep often so leaves don't stain

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Blowing joint sand out of pavers
  • Etching or pitting soft stone like travertine and sandstone
  • Acid cleaners on limestone and travertine
  • Stripping an existing sealer unevenly

Our process for patio cleaning for exposed aggregate

  1. Check the patio material and any sealer
  2. Move furniture and protect nearby plants
  3. Pre-treat growth, grease and stains
  4. Clean with the right pressure and tools
  5. Rinse, re-sand joints if needed, and walk the patio with you

Typical patio cleaning for exposed aggregate prices

$150-$400Typical range for a typical backyard patio
1-2 hoursTypical time on site
Once a year, more often in shadeRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for exposed aggregate

Local patio cleaning for exposed aggregate for Paso Robles, CA

Driveways and patios in California collect oil, dust and tire marks over the long dry season. Cleaning with a surface cleaner and controlling the wash water keeps it out of storm drains.

Some cities in California limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.

Besides Paso Robles (ZIP codes 93446 and 93447), we handle patio cleaning for exposed aggregate in Templeton (5.4 mi), San Miguel (8.7 mi), Atascadero (9.5 mi) and Lake Nacimiento (12.7 mi). Call (555) 010-0000 for a free quote in Paso Robles.

Patio Cleaning for Exposed Aggregate: frequently asked questions

How much does patio cleaning for exposed aggregate cost in Paso Robles, CA?

Patio Cleaning for Exposed Aggregate typically costs $150-$400 for a typical backyard patio, and usually takes 1-2 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for patio cleaning for exposed aggregate?

For exposed aggregate: usually 1,500-2,500 PSI with a surface cleaner. What we avoid: high pressure at edges and cracks, which can pop out aggregate. We keep the pressure even and controlled, with the right tools for the surface.

Is patio cleaning for exposed aggregate safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule patio cleaning for exposed aggregate?

Clean yearly; reseal every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Paso Robles, CA

Gum Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$1,000

Driveway Cleaning for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$400

Exterior Mold & Mildew Removal

Killing and removing mold, mildew and algae from siding, decks, walkways and fences, with treatment that slows regrowth.

Typical $250-$700

Fleet Washing

On-site washing for company trucks, vans, trailers and equipment, scheduled at your yard.

Typical $150-$800

HOA & Apartment Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $800-$5,000

House Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $300-$700

Pre-Paint Washing

Washing siding and trim before painting or staining so new paint bonds to a clean surface.

Typical $250-$600

Pressure Washing for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $150-$600

Oil Stain Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $100-$300

Exterior Mold & Mildew Removal for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$700

Efflorescence Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $200-$600

Pool Deck Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $200-$500

Ready for a cleaner home or business?

Get a free pressure washing quote in Paso Robles, CA. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote